How to Service of Haier Top Loading Fully Automatic Washing Machine HWM 120-826

 How to Service of Haier Top Loading Fully Automatic Washing Machine HWM 120-826

Servicing a Haier top-loading fully automatic washing machine, specifically the HWM 120-826 model, involves a few key steps to ensure it operates smoothly and efficiently. Here’s a general guide to help you with basic servicing and maintenance:

Safety First

• Unplug the Machine: Always disconnect the washing machine from the power source before performing any maintenance or servicing.
• Turn Off Water Supply: Ensure the water supply to the machine is turned off before starting any service.

Basic Maintenance

1. Clean the Filter:

   • Locate the Filter: The filter is usually located at the bottom of the machine, near the drain pump.
   • Remove and Clean: Open the filter cover, remove the filter, and clean it thoroughly under running water to remove any debris or lint.
   • Reinstall: Place the filter back in its position and ensure it is securely closed.

2. Check and Clean the Detergent Drawer:

   • Remove the Drawer: Pull out the detergent drawer and remove it from the machine.
   • Clean Thoroughly: Wash the drawer and any compartments with warm water to remove detergent residues and mold.
   • Dry and Reinsert: Dry the drawer completely before reinserting it into the washing machine.

3. Inspect the Hoses:

   • Check for Leaks: Inspect the inlet and outlet hoses for any signs of wear, cracks, or leaks.
   • Clean the Inlet Screens: If applicable, remove the inlet hoses and clean the screens where they connect to the machine and water supply to ensure there’s no blockage.

4. Examine the Drum:

   • Clean the Drum: Run a drum-cleaning cycle or a hot water cycle with a drum cleaning agent to remove any build-up or residues.
   • Inspect for Foreign Objects: Check the drum for any foreign objects that might have been accidentally washed.

5. Check for Odors:

   • Remove Odors: To tackle unpleasant odors, run a hot wash cycle with a cup of white vinegar or a washing machine cleaner designed for this purpose.

Advanced Service (If Necessary)

1. Inspect Electrical Connections:

   • Check Wires: Inspect the power cord and internal wiring for any signs of damage or loose connections.
   • Consult a Professional: If you’re not experienced with electrical work, it’s best to consult a professional technician for any electrical issues.

2. Test the Sensors and Controls:

   • Run Diagnostics: Many modern machines have self-diagnostic features. Refer to the user manual for instructions on how to run diagnostics if your machine supports it.
   • Address Error Codes: If you encounter error codes, refer to the user manual for troubleshooting steps specific to those codes.

3. Inspect the Pump:

• Check Drainage: Ensure the drainage pump is working properly by observing if the water drains effectively during the wash cycle.
• Clean the Pump: If there’s a blockage, carefully remove and clean the pump, following the manufacturer’s guidelines.

Regular Maintenance Tips

• Level the Machine: Ensure the washing machine is level and stable to avoid excessive vibration during operation.
• Avoid Overloading: Don’t overload the machine, as this can affect its performance and longevity.
• Use Proper Detergent: Use the recommended type and amount of detergent for your machine.

For specific issues or more detailed servicing procedures, always refer to the Haier HWM 120-826 user manual or contact a professional technician. Regular maintenance can help prolong the life of your washing machine and keep it running smoothly.